0
Sn0wbreeze ve Pwangetool ile yapılmış custom firmware dosyaları:
For people who are already on 4.3.3 and want to jailbreak use redsn0w
redsn0w ile jailbreak yapan kullanıcılar
:Bu başlığı okuyarak jailbreak yapabilirler - Read This Topic For Jailbreak
For people who want to upgrade use Custom ipsw this is the best method to upgrade because it preserves your device baseband and allows you to unlock your device.
iPhone CDMA (verizon) users please see custom iOS 4.2.8 below in snowbreeze custom ipsw list
Cihazı sim kilitli olan kullanıcılar bu yöntemle hem cihazlarının güncellemesini sağlayacaklar hemde baseband yükseltmeyerek unlock edebilecekler.
ultrasn0w unlockers must stay away from redsn0w!Use only a custom IPSW to update to 4.3.3, to avoid updating your baseband.
ultrasn0w ile unlock yapan kullanıcılar sadece custom firmware kullanarak update yapsınlar böylece sim kilidini kırmaya devam edeceklerdir. sakın 4.3.3 Custom Firmware dışında güncelleme yapmasınlar.
ultrasn0w has been updated to v1.2.3 to be compatible with iOS 4.3.3 and earlier (the ultrasn0w update does not include any new baseband support!).
ultrasn0w v1.2.3 sürümü ile IOS 4.3.3 de de çalışmaktadır. Bu yüzden önce cihazınıza uygun Custom Firmware Dosyasını aşağıdan indirin
Please reboot your iPhone using the normal “slide to power off” swipe after installing ultrasn0w 1.2.3.
Cydia'dan Ultrasn0w 1.2.3 yükledikten sonra cihanızını normal kapattığınız şekilde üst tuşa basılı tutup sonra ekranda çıkan Kapat sürükleme çubuğunu sürükleyerek kapatıp açsın
By popular demand, redsn0w now allows you to enable multitasking gestures (although most will find it useful only on iPads).
Redsn0w ve Sn0wbreeze kullanıcıları iPad'ın multitasking gestures özelliğini de son güncellemeleriyle kullanabiliyorlar.
Eğer 3194 Hatası Alırsanız & IF YOU GET ERROR 3194+
++++++++++++++++++++++
* TinyUmbrella programını kapatın - TinyClose down any TinyUmbrella's.
* host dosyanızdan Cydia SHSH ip adresini silip kayıt edip kapatın & Remove Cydia's SHSH caching server from your hosts
(C:\WINDOWS\system32\driver\etc\hosts)
Eğer 16xx Hatası alırsanız & IF YOU GET ERROR 16xx :
1- pwangetool, redsn0w, iReb , snowbreeze kullanarak DFU Moda geçiş yapabilirsiniz. & use pwangetool, redsn0w, iReb , snowbreeze to enter DFU mode
Pwangetool ile yapılmış Custom IOS 4.3.3 Firmware & iOS 4.3.3 Custom ipsw made with Pwangetool :
iPad1
====================
iPhone4 (GSM) ACTIVATED :
iPhone4 (GSM) UN-Activated :
========================
iPhone 3GS ACTIVATED :
iPhone 3GS UN-Activated :
=========================
iPod touch 3G :
iPod touch 4G :
===========================
AppleTV2G (v4.3 8F202) :
====================================
iOS 4.3.3 Custom ipsw made with Snowbreeze :
The sn0wbreeze has the following tweaks :
1- Multi tasking gestures are pre-installed and after jailbreak u can find it in Settings >> General
2- iPhone3GS New bot Rom and old bot Rom custom ipsws
3- iPhone3GS custom ipsw option with 06.15 baseband Upgrading your iPhone 3GS baseband to 06.15.00 iPad baseband hack to unlock MAY cause you to lose your GPS!and also you can't downgrade back from 06.15.00 once u have upgraded !
==============
iPad 1G
==========================
iPhone 4 (GSM) ACTIVATED
iPhone 4 (GSM) UN-ACTIVATED
===========================================
iPhone 4 iOS 4.2.8 (CDMA) verizon
=====================================================
iPhone 3GS NEW boot Rom ACTIVATED
iPhone 3GS NEW boot Rom UN-ACTIVATED
iPhone 3GS NEW boot Rom baseband 06.15 ACTIVATED
iPhone 3GS NEW boot Rom baseband 06.15 UN-ACTIVATED
http://www.filesonic..._sn0wbreeze.zip
====================
iPhone 3GS OLD boot Rom ACTIVATED
iPhone 3GS OLD boot Rom UN-ACTIVATED
iPhone 3GS OLD boot Rom Base Band 06.15 ACTIVATED
iPhone 3GS OLD boot Rom Base Band 06.15 UN-ACTIVATED
http://www.filesonic..._sn0wbreeze.zip
============= =================
iPod 4G (4th gen)
iPod 3G (3rd gen)
================
AppleTV2G (v4.3 8F202) :
================
